How to enable EVDO DUN on ANY EVDO capable phone in 10 easy steps!
Step 1
http://www.myvusers.com/forums/userg...pst2.7b215.zip
or
Go to the following link. The very first post should be a link to QPST 2.7 build 215. You will have to register in order to download it.
http://www.mobile-files.com/forum/s...&highlight=QPST
Step 2
Download QPST 2.7 build 215 and install it.
Step 3
Connect your phone to your PC via usb cable or via bluetooth.
Step 4
Launch the QPST Configuration Tool
Add the port your phone is listening on. If your phone is capable, you can connect via bluetooth or simply use a USB cable, the choice is yours.
Be sure to specify the correct port.
If you are not sure what port your phone is connected to, try downloading BitPim and using the auto-detect feature to determine which port your phone is listening on.
You'll know that you've specified the correct port once the Configuration Tool has picked up your phone.
Step 5
Launch the Service Programming tool that is part of the QPST Suite.
Step 6
Connect to your phone with the Service Programmer. If you have completed the previous steps successfully, you will see your phone listed.
Step 7
Click the 'Phone' menu, then 'Read from Phone'. Wait for the Service Programmer to read the data from your phone. BEFORE making any changes, click 'Save to File' and
BACKUP your qcn file.
DO NOT SKIP THIS STEP!
Step 8
Once you have backed up your qcn file. Scroll to the 'M .IP' tab. Once there, select your entry from the list, and click 'Edit'.
Step 9
You must edit your 'Tethered NAI' so that your phone will use the same login information for both EVDO and CDMA-1X network access. If your mobile number is 1234567890 then your 'Tethered NAI' will read '1234567890@dun.vzw3g.com'. Change it so that it reads '1234567890@vzw3g.com'. Once complete, your 'NAI' and 'Tethered NAI' should be EXACTLY the same. Click 'OK'.
Step 10
Click 'Write to Phone' to write the modified qcn file to your phone.
Enjoy, your 'DUN'!
To use the EVDO DUN service, add an new dialup connect with the following credentials:
Phone Number: #777
Username:
MobileNumber@vzw3g.com (ex:
1234567890@vzw3g.com)
Password: verizon
Be sure to select your phone as the default modem for this connection.
Cheers,
randyman
BEWARE that VERIZON MAY BE CHARGING YOU FOR DATA USAGE AND NOT AS VOICE MINUTES